FUJI Super Raicho II 106mm cutting discs — made in Japan, designed for durable cutting with compatible 4-inch-class angle grinders approved for 106mm wheels.
The larger 106mm diameter provides additional wear allowance compared with 100mm at the same usable minimum diameter. Cutting only: never apply side pressure or use for grinding.
Made in Japan, FUJI Super Raicho II 106mm cutting discs provide durable cutting for two distinct applications: the silver 2.2mm A36P wheel for stainless steel and the gold 2.4mm A30S wheel for ordinary carbon steel. Choose the version by material, then confirm the mounting bore and grinder compatibility.
The 106mm diameter provides more radial wear allowance than a 100mm disc when compared at the same usable minimum diameter. Actual cuts per wheel depend on material, section, machine and technique; diameter alone does not establish a fixed life improvement.
Both versions use a Japanese warm-press process, selected corundum abrasive, Sumitomo phenolic resin and two layers of alkali-free fiberglass mesh. Manufactured in Japan to comply with JIS R 6214:2006 for resinoid cutting-off wheels, they are designed for durable straight cutting. Reinforcement does not permit side grinding or twisting.
Use only a grinder and cutting guard approved for a 106 mm wheel, with the correct mounting arrangement. The Japanese domestic version has a 15mm bore; the export version has a 16mm bore. These are alternative product versions, not interchangeable mounting sizes. A 100mm or 4-inch machine rating alone does not establish approval for 106mm. Do not remove the guard or modify the bore to make a wheel fit.
| Dimensions (mm) | Type / Grade | Application | Max Speed | Package Qty |
|---|---|---|---|---|
| 106 x 2.4 x 15 or 16 | A30S BF2 | Gold: ordinary carbon steel | 80 m/s Maximum RPM: follow wheel label |
200 pcs (10 boxes x 20) |
| 106 x 2.2 x 15 or 16 | A36P BF2 | Silver: stainless steel | 80 m/s Maximum RPM: follow wheel label |
200 pcs (10 boxes x 20) |
Silver 2.2mm A36P: choose for stainless steel tubing, bars and fabrication components. Gold 2.4mm A30S: choose for ordinary steel bars, tubes, angles and general fabrication. For very thin sheet where kerf width matters most, compare an appropriately rated thinner disc.
Maximum peripheral speed: 80m/s. This is a rim-speed limit, not RPM. Follow the maximum RPM printed on the supplied wheel and ensure the grinder does not exceed it.
These discs are the preferred choice for professionals in:
A: Compare kerf width, cutting time, disc wear and burr formation on your workpiece. A thicker disc is not automatically safer and is not intended to tolerate twisting or side grinding. Select the thickness and grade approved for the task and machine.
A: "BF" stands for Bakelite (Resin) bond with Fiber reinforcement. The "2" indicates double-sided reinforcement, supporting the wheel structure. It is not a standalone certification or a guarantee against breakage.
A: Select the silver 106 x 2.2mm A36P version for stainless steel pipe, bar and sheet. The gold 106 x 2.4mm A30S version is intended for ordinary carbon steel. Keep stainless steel tools separate from carbon steel work to reduce contamination.
Fuji Grinding Wheel is a premier manufacturer of industrial abrasives with over 70 years of Japanese engineering heritage. Our mission is to enhance productivity through safe, durable, and high-performance grinding solutions.
Need a quote? Contact FUJI Grinding Wheel today for pricing and distributor information
Choosing the correct abrasive wheel is critical for both operational efficiency and JIS-compliant safety. Fuji Grinding Wheels are engineered with precise technical markings to ensure the perfect match for your specific material and machine requirements.
For professional export markets, always verify the Peripheral Speed (m/s) compatibility. Fuji wheels are designed to exceed JIS Burst Speed factors, but operating at the recommended R.P.M. ensures the longest tool life and cleanest cut.
Note: Mismatched grit or hardness can lead to excessive heat buildup, affecting the workpiece's structural integrity.
Global Maintenance Standard: To maintain the high safety factor of Fuji wheels, avoid exposure to excessive humidity and chemical solvents during storage. Proper care preserves the resinoid bond's strength, crucial for high-load industrial applications.
Fuji products are manufactured following strict Japanese standard process requirements. Every wheel is engineered to meet or exceed JIS (Japanese Industrial Standards), such as JIS R 6242 and B 4051. Our core engineering logic prioritizes maximum operator protection by maintaining safety factors and burst speed capabilities that often surpass the highest industry benchmarks.
| Standard Region | Safety Factor (Burst Multiplier) | Safety Logic & Benchmark |
|---|---|---|
| FUJI (High Precision) | > 2.0x | Engineered to exceed JIS requirements for maximum reliability. |
| Japan (JIS R 6242) | 2.0x | Extreme Safety: A wheel rated at 80m/s must withstand a 160m/s burst test. |
| Europe (EN 12413) | 1.73x | Risk Balanced: Provides high safety redundancy for most industrial apps. |
| USA (ANSI B7.1) | 1.5x | Efficiency Focused: Relies on machine guarding and operational procedures. |
Abrasive Selection Guide
Selection of grains (A, WA, AZ, etc.) based on material hardness and grinding precision.
Warning Symbol Interpretation
Standardized safety icons for safe operation and protection guard usage.
When deploying Fuji high-performance tools in overseas markets, ensure that the regional power grid frequency and voltage match the tool specifications. To maintain the superior burst speed safety of Fuji wheels, store abrasives in a dry, temperate environment. Humidity can degrade the resin bond, potentially lowering the wheel’s resistance to centrifugal forces.
Fuji products are manufactured following strict Japanese standard process requirements. Every wheel is engineered to meet or exceed JIS (Japanese Industrial Standards), such as JIS R 6242 and B 4051. Our core engineering logic prioritizes maximum operator protection by maintaining safety factors and burst speed capabilities that often surpass the highest industry benchmarks.
| Standard Region | Safety Factor (Burst Multiplier) | Safety Logic & Benchmark |
|---|---|---|
| FUJI (High Precision) | > 2.0x | Engineered to exceed JIS requirements for maximum reliability. |
| Japan (JIS R 6242) | 2.0x | Extreme Safety: A wheel rated at 80m/s must withstand a 160m/s burst test. |
| Europe (EN 12413) | 1.73x | Risk Balanced: Provides high safety redundancy for most industrial apps. |
| USA (ANSI B7.1) | 1.5x | Efficiency Focused: Relies on machine guarding and operational procedures. |
Abrasive Selection Guide
Selection of grains (A, WA, AZ, etc.) based on material hardness and grinding precision.
Warning Symbol Interpretation
Standardized safety icons for safe operation and protection guard usage.
When deploying Fuji high-performance tools in overseas markets, ensure that the regional power grid frequency and voltage match the tool specifications. To maintain the superior burst speed safety of Fuji wheels, store abrasives in a dry, temperate environment. Humidity can degrade the resin bond, potentially lowering the wheel’s resistance to centrifugal forces.
