FUJI FS-B10E: Wet precision cutting with double workpiece clamping and a transparent protective cover. Match the wheel, coolant and feed to the material and required cut quality.
Confirm machine ratings, cutting capacity and supplied accessories before ordering.
The FS-B10E is a wet abrasive cutting machine for precision sectioning of metal components. Cooling and secure workpiece clamping help control the cutting process. Select the cutting wheel and operating conditions for the material, sample geometry and required cut quality.
For metallographic preparation, evaluate the cut surface and any thermal or mechanical alteration using the applicable laboratory procedure. Wet cutting helps manage heat; it does not guarantee an unchanged microstructure or eliminate subsequent grinding and polishing.
| FS-B10E | Catalogue specification |
|---|---|
| Wheel dimensions | 255 × 1.2 × 31.75 mm |
| Main motor / supply | 2.2 kW, three-phase 200 V, 4 poles |
| Spindle speed | 1800 min⁻¹ (50 Hz) / 2100 min⁻¹ (60 Hz) |
| Maximum cutting capacity / vise opening | Ø55 mm / 60 mm |
| Coolant pump | 20 W; 30 / 40 L/min (50 / 60 Hz) |
| Machine size (W × D × H) | 880 × 610 × 1100 mm |
| Weight | 200 kg |
Confirm the electrical supply, permitted wheel diameter and bore, spindle speed, cutting capacity and supplied accessories for the ordered machine configuration.
Review the F-Series thin cutting wheels as a starting point. Wheel diameter, thickness, bore, speed rating and wet-use suitability must match the machine and task. Hard alloys and other demanding materials require a specifically suitable abrasive specification and an application trial.
No universal result can be promised. Burrs, heat effects and finishing requirements depend on material, wheel, clamping, feed and coolant conditions.
Provide the material grade and hardness, workpiece dimensions, desired section thickness, required finish, available power supply and expected daily workload.
Three F-CUT PWA 100N wheels (255 × 1.2 × 31.75 mm), a spanner and 1 L of cutting fluid are listed. A carry set supports moving, fixing and leveling the machine. The power cord is 4 m; confirm plug provision for the destination, because the Japanese and English catalogue notes differ.
Ask FUJI to confirm the FS-B10E configuration and cutting-wheel selection.
Fuji products are manufactured following strict Japanese standard process requirements. Every wheel is engineered to meet or exceed JIS (Japanese Industrial Standards), such as JIS R 6242 and B 4051. Our core engineering logic prioritizes maximum operator protection by maintaining safety factors and burst speed capabilities that often surpass the highest industry benchmarks.
| Standard Region | Safety Factor (Burst Multiplier) | Safety Logic & Benchmark |
|---|---|---|
| FUJI (High Precision) | > 2.0x | Engineered to exceed JIS requirements for maximum reliability. |
| Japan (JIS R 6242) | 2.0x | Extreme Safety: A wheel rated at 80m/s must withstand a 160m/s burst test. |
| Europe (EN 12413) | 1.73x | Risk Balanced: Provides high safety redundancy for most industrial apps. |
| USA (ANSI B7.1) | 1.5x | Efficiency Focused: Relies on machine guarding and operational procedures. |
Abrasive Selection Guide
Selection of grains (A, WA, AZ, etc.) based on material hardness and grinding precision.
Warning Symbol Interpretation
Standardized safety icons for safe operation and protection guard usage.
When deploying Fuji high-performance tools in overseas markets, ensure that the regional power grid frequency and voltage match the tool specifications. To maintain the superior burst speed safety of Fuji wheels, store abrasives in a dry, temperate environment. Humidity can degrade the resin bond, potentially lowering the wheel’s resistance to centrifugal forces.
Fuji products are manufactured following strict Japanese standard process requirements. Every wheel is engineered to meet or exceed JIS (Japanese Industrial Standards), such as JIS R 6242 and B 4051. Our core engineering logic prioritizes maximum operator protection by maintaining safety factors and burst speed capabilities that often surpass the highest industry benchmarks.
| Standard Region | Safety Factor (Burst Multiplier) | Safety Logic & Benchmark |
|---|---|---|
| FUJI (High Precision) | > 2.0x | Engineered to exceed JIS requirements for maximum reliability. |
| Japan (JIS R 6242) | 2.0x | Extreme Safety: A wheel rated at 80m/s must withstand a 160m/s burst test. |
| Europe (EN 12413) | 1.73x | Risk Balanced: Provides high safety redundancy for most industrial apps. |
| USA (ANSI B7.1) | 1.5x | Efficiency Focused: Relies on machine guarding and operational procedures. |
Abrasive Selection Guide
Selection of grains (A, WA, AZ, etc.) based on material hardness and grinding precision.
Warning Symbol Interpretation
Standardized safety icons for safe operation and protection guard usage.
When deploying Fuji high-performance tools in overseas markets, ensure that the regional power grid frequency and voltage match the tool specifications. To maintain the superior burst speed safety of Fuji wheels, store abrasives in a dry, temperate environment. Humidity can degrade the resin bond, potentially lowering the wheel’s resistance to centrifugal forces.
